Publicidad
Idiomas disponibles
Idiomas disponibles
Connect the power wires of 3 x RNB38-6 ring terminal with cable lugs to the input terminal
marked with "L1", "L2" and "L3" using 3 x M6.0 screws with of 28.7 lb-in Torque force.
Connect the ground wire of RNB14-6 into the earth terminal marked with ground symbol
(
) using 1 x M6.0 screw with 17.7 lb-in Torque force.
Neutral wire is not required.
WARNING!
!
Cable color coding may be defined differently depending on the region.
5. Fasten each wire with the proper screw. Make sure the correct amount of torque is used. See
listed information.
6. Place lid back onto terminal block.
CAUTION!
!
M
AKE SURE THE ELECTRIC WIRE CONDUIT IS ALIGNED WITH THE
WIRE OPENING PRIOR TO INSTALLATION
.
CHARGER
7. Put front cover back and fasten screws securely.
Installation and Operation Manual
. F
AILURE TO DO SO COULD DAMAGE THE WIRING OR THE
3
1
16
Making the Connection
DC W
ALLBOX CHARGER INPUT
2
Publicidad
