Delta DC Wallbox Charger Manual De Instrucciones página 27

System Configuration
WARNING!
!
Only configure the charger when the charger is not in charging mode to avoid interruption of
an ongoing charging session.
Steps:
1. Contact service provider to login online configuration tool.
2. When the configuration is done, copy the parameter file (DeltaDCWallboxConfig) to the root of a
USB flash drive (the drive format should be FAT/FAT32, < 32GB).
3. Insert the USB flash disk into the USB port on the bottom (labeled USB). The configuration will
be uploaded to the DC Wallbox.
4. Remove the USB flash drive when the configuration is complete.
5. Close the protection cover. The cover has a hole to put padlock into it to avoid tampering.
Installation and Operation Manual 23
System Configuration