Publicidad
Idiomas disponibles
Idiomas disponibles
Download a copy of the user manual and quick guide on www.tesmed.com
Before use, read carefully the user manual, paying attention to the warnings and
contraindications listed in it.
DEVICE READY FOR USE,
DO NOT RECHARGE IMMEDIATELY.
Use until completely discharged, then recharge for
approximately 8 hours, ignoring the symbol on the
display while charging.
The device cannot be used while recharging.
2.
Insert the electrodes in the cables and
place them on the treatment area
You may refer to the electrodes
placement photos in the manual
HOW TO RECHARGE THE DEVICE
on, recharge the device. The display will light up for 20 seconds and the battery symbol will flash. After approximately 4 hours the
battery symbol will stop flashing and remain steady. At this point, the battery will have a more than
sufficient charge.
To recharge the battery fully, leave the device on charge for a total of approximately 8 hours.
For better battery efficiency, only recharge the device when the battery has completely discharged
ATTENTION: the device is fitted with a timer that stops the battery symbol from
flashing after 4 hours, indicating the end of an initial rapid-charge period for sufficient
autonomy. For a full recharge, leave the device on charge for a further 4 hours. This second stage
completes the battery recharge process at a slower rate in order to optimise the life of the battery.
Please note: each time the device is placed on charge, the battery symbol will flash for approximately 4
hours and then remain steady, irrespective of the residual charge of the battery when recharging begins.
EQUIPMENT DESCRIPTION
If the flashing battery symbol appears, or if the device switches off or does not switch
6
1.
LCD display and keys
1
Tesmed logo
2
Program number
3
Program symbol
4
Low battery symbol
5
Frequency symbol
6
Selected output channels ( n. 4)
7
Relative intensity value for each
4 output
8
Functions key (MODE)
Decrease key (
)
9
10 Increase key (
)
11 ON/OFF and select channels
double function key
12 Intensity symbol
13 Keyboard block and ON block
symbol
14 Timer symbol
15 Treatment time and remaining
time
16 Clock symbol
17 Output channels
18 Battery recharger socket
19 Battery door
20 Removable belt hook
Connect the 4
bipolar cables
The pins of the cables
can be connected
indifferently to the
electrodes since they
have no differences in
polarity
Publicidad
