Publicidad
Idiomas disponibles
Idiomas disponibles
3. Use mode
Switching on
Press the key
for approximately 2 seconds: the system runs a selftest procedure, during
which the display shows all the available functions
then appears on the display what shown in
- "Display lighting" function
The display illumination turns off automatically after about 20 seconds in the absence of
interactions.
The display is lit again when you press any key.
- "Self switchingoff" function
The Tesmed automatically switches off is not used for more than 5 minutes in order to
save the battery.
After switching on the device, press in succession key
of channels you want to use to suit the treatment and then key
program
(fig.
C).
Attention: The programs in the Tesmed are modulates to provide various stages (different
frequencies of waves) of massage ranging from 1 to a maximum of 5 stages.
Some programs have one or more WAIMSSYSTEM
During treatment, and especially with the WAIMSSYSTEM
you adapt the intensity of each channel, as your sensitivity will vary various from one group
of muscles to another.
Programs
Only in programs from 01 to 20 you can change time and
frequency
In programs from 01 to 20, once selected the program, it's possible to customize the
treatment time and frequency.
Treatment time adjustment
Press key
and the relevant symbol
treatment time: from min 1 minute to max 60 minutes.
Press key
again to switch to the intensity adjustment
keys
and
.
Frequency adjustement
You can adjust the frequency only after giving intensity and started treatment. Press key
for 3 seconds to enter the frequency control mode. Press keys
increase or to decrease the frequency. The symbol
indicate frequency control mode
The frequency is the number of pulses per second, when you change the frequency, you
feel an increase or decrease in the speed of stimulation.
ATTENTION: if you are in frequency control mode during a treatment and you want to
clear the intensity, press key
Programs from 21 to 99: preset with different stimulation steps
After having selected a program from 21 to 99, press key
2 keys
and
.
For the programs choice, refer to the tabs in the manual with the indication of
treatments, program, electrodes photos, duration, phases and days.
(fig.
A);
fig.
B.
stages.
®
(fig.
D). Use keys
(fig.
E). Press key
once to quit frequency control mode.
twice.
, to select the number
, to select the
, we always recommend that
®
and
to adjust the
, which is adjusted with the 2
and
repeatedly to
flashes, at a varying speed, to
, which is adjusted with the
7
Publicidad
