Machine Components - Collomix Xo 1 R Manual De Servicio

EN Technical data
Rated power/Current consumption:
Power supply:
Frequency:
No-load speed, 1. gear
2. gear
Rpm under load, 1. gear
2. gear
Maximum mixing tool diameter:
Weight w/o mixing tool:
Protection class:

Machine components

1 Release button for ON/OFF switch
2 ON/OFF switch
3 Gear selection switch (for Xo 4 R/Xo 6 R only)
4 Handle frame
5 Handles
6 Ventilation slits
7 Neck of the machine
8 Mixing shaft
9 HEXAFIX adapter / size M14 adapter
10 Mixing tool
Noise/vibration levels
Measured values determined in accordance with EN
60745. The A-weighted noise level of the machine is
typically:
Sound pressure level
L [dB(A)]
pA
Xo 1 R 82 dB(a)
Xo 4 R 87 dB(a)
Xo 6 R 87 dB(a)
Uncertainty K = 3 dB
Overall vibration level (for mixing of mineral
materials)
Emission level a
Xo 1 R
Xo 4 R
Xo 6 R
Uncertainty K = 1,5 m/s
Xo 1 R
1150 W
230-240 V
50/60 Hz
- 925 min
- 640 min
120 mm
4,2 kg
q / II
Sound power level
L [dB(A)]
WA
93 dB(A)
98 dB(A)
98 dB(A)
[m/s ]
2
n
1,6 m/s
2
2,0 m/s
2
2,0 m/s
2
2
Xo 4 R
1500 Watt
230-240 Volt
50/60 Hz
- 660 min
-1 -1
- 920 min
-1
- 420 min
-1 -1
- 590 min
-1
140 (150*) mm
5,2 kg
q / II

WARNING:
The measured values which are provided apply to new
machines. Noise and vibration levels change with day-to-
day use.

NOTE
The vibration level given in these instructions was
measured in accordance with a standardized method of
measurement as defined in EN 60745 and can be used
for the purposes of comparing electrical tools with each
other. It is also suitable for a preliminary estimation
of vibration strain. The vibration level which is given
represents vibration level for the primary use of the
electrical tool. If, however, the electrical tool is used for
any other purposes, with different plug-in tools or with
insufficient maintenance, the vibration level may vary.
This can result in a significantly higher level of vibration
strain over the work period as a whole.
For a precise estimation of the vibration strain the times
when the machine is switched off have to be taken into
account as well, as do the times when it is running but is
not actually being used. This can result in a significantly
reduced level of vibration strain over the work period as
a whole.
CE Declaration of Conformity
We declare, with sole responsibility, that this product
complies with the following standards or normative
products: EN 50581:2013-02, EN 55014, EN 61000, EN
60745-1:2009 + EN60745-2-1:2010 in accordance with
the provisions of directives 2014/30/EU, 2006/42 EC,
2011/65/EU.
Gaimersheim, 2018-12-04
Alexander Essing
Managing Director
Technical documentation can be requested from:
Collomix GmbH
Abt. Technische Entwicklung
Daimlerstr. 9, 85080 Gaimersheim, Germany
Xo 6 R
1750 Watt
230-240 Volt
50/60 Hz
- 660 min
-1
- 920 min
-1
- 400 min
-1
- 560 min
-1
160 mm
5,2 kg
q / II