Abicor Binzel ABICAR 1200 PRO 42V Manual De Instrucciones página 50

6 Putting into operation
6.8.1 Main menu
Fig. 14
A Operating status
B Selected JOB (setup)
6.8.2 Configuration menu
Up to 40 welding programmes (JOBs) can be created and saved in the configuration menu.
Accessing the configuration menu
EN - 20
Main menu overview
ABICAR 1200 PRO 42V
C Function of F1
D Function of F2
A
B
C
D
► To select another JOB, keep F2 pressed and rotate
left or right.
► Confirm the selection by releasing F2.
If the direction switch was not actuated, then further
adjustments within the JOB are possible.
Example 1:
► Rotate F1 to adjust the oscillation width.
► Rotate F2 to adjust the oscillation speed.
The value will be applied and does not have to
be confirmed.
Example 2:
► Rotate F1 to adjust delay time 1.
► Press F1 to change delay time 1 to oscillation width.
► Rotate F2 to adjust delay time 2.
► Press F2 to change delay time 2 to oscillation speed.
The value will be applied and does not have to be
confirmed.
► To enter the configuration menu, keep F1 pressed for
approx. 3 s.
It is changed in the configuration menu and the
"Carriage speed" parameter will be displayed.
► To re-enter the configuration menu, keep F1 pressed
for approx. 3 s.