Checkme BP2A Manual Del Usuario página 11

Note: The device cannot be used while charging.
3.2 Blood Pressure Measurement
3.2.1 Before Taking Measurements
To help ensure accurate measurements, follow these
directions:
Rest for at least 5 minutes before taking measurements.

Stress raises blood pressure. Avoid taking measurements

when stressed.
Remove any tight-fitting clothing from your arm.

A single measurement does not provide an accurate

indication of your true blood pressure. You need to take
and record several results over a period of time.
Try to measure your blood pressure at the same time each

day to maintain consistency.
3.2.2 Applying the Arm Cuff
1. Wrap the cuff around the upper arm, about 1 to 2 cm
above the elbow joint, as shown.
2. Place the cuff directly against the skin, as clothing may
cause a faint pulse and result in measurement errors.
3. Constriction of the upper arm, caused by rolling up a
shirtsleeve, may prevent accurate readings.
4. Confirm that the artery position mark is lined up with the
artery.
Note：Keep the host wear position aligned with the middle
finger.
9