Checkme BP2A Manual Del Usuario página 6

without consulting your doctor. In particular, do not start
taking any new medication or change the type and/or
dosage of any existing medication without prior approval.
It is not possible to use this device to diagnose illnesses or

diseases. This is exclusively the responsibility of your
doctor.
Clean the device and cuffs with a dry, soft cloth or a cloth

moistened with water and a neutral detergent. Never use
alcohol, benzene, thinners, or other harsh chemicals to
clean the device or cuffs.
Avoid tightly folding the cuffs or wrapping the hoses for

long periods, to avoid shortening the component use
period.
The device and cuffs are not water-resistant. Keep rain,

sweat and water from getting on the device and cuffs.
Measurements may be distorted if the device is used close

to televisions, microwave ovens, mobiles phones, X-rays,
or other devices with strong electrical fields.
Do not modify the device. It may cause damage to the

device.
To measure blood pressure, the arm must be squeezed by

the cuff hard enough to temporarily stop blood flow
through the artery. This may cause pain, numbness, or a
temporary red mark on the arm. This condition will appear
especially when measurements are repeatedly taken. Any
pain, numbness, or red marks will disappear with time.
Do not apply the cuff on an arm with another electronic

medical device. The equipment may not function properly.
People who have a severe circulatory deficiency in their

arm must consult a doctor before using the device, to
avoid medical problems.
Do not self-diagnose the measurement results and start

treatment on your own. Always consult your doctor to
4