Checkme BP2A Manual Del Usuario página 12

3.2.3 Sitting Correctly
To take measurements, you need to be relaxed and
comfortably seated. Sit in a chair with your legs uncrossed
and your feet flat on the floor. Place your arm on a table, so
that the cuff is level with your heart.
3.2.4 Measuring Blood Pressure
1. Power on the blood pressure monitor.
2. Press the Start/Stop button to start taking blood pressure
measurements.
3. The monitor will automatically deflate the cuff slowly
while taking measurements. A typical measurement takes
about 30s.
4. The readings will be displayed when the measurement is
finished.
You can press Start/Stop button again to stop the blood
pressure measurement.
Note: While taking measurements, you should remain
still and not squeeze the cuff
3.2.5 After Taking Measurements
The monitor will automatically release the gas in the cuff
once finished taking measurements.
Press the button to turn the power off after taking
measurements. Remove the cuff.
.
10