LINDR CWP 100 Green Line new Instrucciones De Uso página 23

NOTE: Remember to dismount the tap and remove the cleaning balls.
21. MAINTENANCE :
Flush the beverage tubing of the cooler
after each use with pressurised water (see
Sanitation by Water). To make flushing eas-
ier, use a sanitation adapter according to
your type of keg coupler (sanitation adapt-
er is not included). The cooler must be san-
itised once every 14 days by a person with
chemical
22. INSPECTION BEFORE EVERY USE:
1. Visual check.
2. Kontrola přívodu kabelu.
3. Zanešení kondenzátoru (v případě nadměrného zanešení čistíme častěji než 1x měsíčně).
4. Kontrola hladiny vody.
WARNING: Do not use the device if defects or malfunctions are found.
23. PERIODIC CHECKS:
1x day: check the water level in the tank.
1x a week: check that the lead-in cable is
undamaged and that the plug is firmly in the
socket.
1x a week: check that the device is not ex-
posed to radiant heat.
24. ENVIRONMENTAL PROTECTION:
Waste Sorting
This product must not be disposed of in communal waste. Electrical waste in the Czech
Republic is disposed of within the Rema System (www.remasystem.cz).
In countries other than the Czech Republic, waste sorting is subject to local regulations.
Sorting waste allows recycling and reusing used products and packaging materials. Reuse
of recycled material helps protect the environment from pollution and reduces resource
consumption. Local regulations may regulate the method of disposing of household ap-
pliances at local collection points or at the point of sale.
engineering qualifications. The condenser
must be checked for cleanliness every month.
Any dirt found must be cleaned with com-
pressed air or wiped off. Otherwise, there is a
risk of reduced cooling output or damaging of
the cooler.
1x a week: check that air circulation is not
obstructed.
1x a month: check the cooling unit's con-
denser and clean it regularly.
1x a month: check water purity in the devi-
ce (chiller tank), or change it if necessary.
1x a year: have an engineering inspector
check the electrical safety of the device.
EN
23