Descargar Imprimir esta página

Gas Valve; Cleaning And Maintenance; Chimney Sweep Function - Sime P100 BOX Manual Del Usuario

Ocultar thumbs Ver también para P100 BOX:

Publicidad

Idiomas disponibles

Idiomas disponibles

4.2

GAS VALVE

Each.single.module.is.mass.produced.
with. gas. valve. model. DUNGS. GB-GD.
057.(fig..20).
4.3

CLEANING AND MAINTENANCE

Scheduled.generator.maintenance.must.
be. performed. annually. by. authorised.
technicians.
During maintenance operations the
authorised technician must check that
the syphened drip is full of water (this
check is of importance particularly
when the generator has been out of use
for a long period of time). Filling is done
via the special opening (fig. 21).
4.3.1

Chimney sweep function

To. check. single. module. combustion,.
rotate. the. selector. to. position. ( ). until.
the. yellow. led. (
). starts. to.
blink.(fig..22)..
At.this.time.the.module.will.start.to.heat.
at.maximum.power.and.turn.off.at.80°C,.
restarting.at.70°C.
Before starting the chimney sweep fun-
ction, make sure the radiator valves or
any other area valves are open.
After. checking. combustion,. turn. off. the.
module.by.rotating.the.selector.to.(OFF);.
return. the. selector. to. the. required. fun-
ction.
WARNING: After about 15 minutes the
chimney sweep function automatically
turns off.
5
1
SPIA GIALLA INTERMITTENTE
BLINKING.YELLOW.LIGHT
SPIA ROSSA
6
KEY
1.
Upstream.pressure.fix-
ture
5.. Shutter
6.. OFF-SET
SPIA GIALLA
IT
ES
ENG
Fig..20
Fig..21
S
Fig..22
S
75

Publicidad

loading

Este manual también es adecuado para:

P200 boxP300 boxP400 boxP500 boxP600 box