Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Black or grey
marks on dishes
Detergent left in
dispenser
The dishes aren't
drying
WARNING
Self-repair or non-professional repair may cause serious risks to the safety of the user
of the appliance and impact warranty.
Availability Of Spare Parts
Seven years after placing the last unit of the model on the market:
●
Motor, circulation and drain pump, heaters and heating elements, including heat pumps
(separately or bundled), piping and related equipment including all hoses, valves, filters
and aqua stops, structural and interior parts related to door assemblies (separately or
bundled), printed circuit boards, electronic displays, pressure switches, thermostats and
sensors, software and firmware including reset software.
Ten years after placing the last unit of the model on the market:
●
Door hinge and seals, other seals, spray arms, drain filters, interior racks and plastic
peripherals such as baskets and lids.
Possible reason
Aluminium utensils
●
have rubbed against
dishes
Dishes block
●
detergent dispenser
Improper loading
●
Dishes are removed
●
too soon
Wrong program has
●
been selected.
Use of cutlery with a
●
low-quality coating.
Solution
Use a mild abrasive cleaner to
eliminate those marks.
Re-loading the dishes properly.
Use gloves if detergent residue can
be found on dishes to avoid skin
irritations.
Do not empty your dishwasher
immediately after washing. Open
the door slightly so that the steam
can come out. Take out the dishes
until the inside temperature is safe
to touch. Unload the lower basket
first to prevent the dropping water
from the upper basket.
With a short program, the
washing temperature is lower,
decreasing cleaning performance.
Choose a program with a long
washing time.
Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in
the dishwasher.
36
Publicidad
