Bestway SALUSPA Manual De Instrucciones página 11

PRCD TEST
SPA PUMP EQUIPOTENTIAL BONDING TERMINAL
It is recommended to arrange for a qualified electrician to connect
the spa pump to an equipotential bonding terminal using a
minimum 2.5mm
When inflating, you will notice that air will be expelled from
the area where the air hose connects to the pump, this is
normal for technique requirements.
Important: Don't cover the holes on the base of the
inflation hose. This operation will over inflate the liner and
damage the structure.
Do not use an air compressor to inflate the pool.
Do not drag the pool on rough ground as this may cause
damage to the pool liner. Inflation time for reference only.
RESET
TEST
1
RESET
TEST
solid copper conductor.
2
3
11
RESET
TEST
2
RESET
TEST
4