Tripp-Lite B021-SWHD-K Manual Del Propietário página 10

5. Installation
To install the B021-SWHD-K using the 2-in-1 mounting kit, do the following:
1
Screw the rail set to the rack using the included rack screws, as shown.
Note: When attaching the rail, make sure the triangular section of the rear of the 2-in-1 mounting kit's mounting rails is oriented upward
and the side marked "L" or "R" is facing the interior.
2
To attach the LCD KVM onto the rack, align the rail set and stabilize it with the included rack screws.
10