Publicidad
Idiomas disponibles
Idiomas disponibles
1
BEFORE STARTING THE INSTALLATION PROCEDURE
Carefully read this manual.
Installation and maintenance should be carried out by technical
personnel qualified for this type of machine, in compliance with
current safety regulations.
When receiving the unit please check its state verifying if any
WARNING:
Electrical and electronic products may not be
mixed with unsorted household waste. Do NOT try to dis-
mantle the system yourself: the dismantling of the system,
treatment of oil and of other parts must be done by an
2
INTENDED USE
Galletti S.p.A. will not accept any liability for damage or injury
caused as a result of installation by non-qualified personnel; im-
proper use or use in conditions not allowed by the manufactur-
er; failure to perform the maintenance prescribed in this manual;
INSTALLATION SITE
When choosing an installation site, you should observe the fol-
lowing rules:
Ū install the unit indoor only.
Ū Do not install the unit in a room containing flammable, al-
kaline, acidic, oily, or very humid air, nor in one where wa-
ter may be projected (e.g. laundry room). The components
would be irreparably damaged,
Ū The air conditioning unit should not be placed immediately
under a socket,
Ū do not install the unit where excessively high heat-generat-
ing equipment is located,
Ū make sure that in the chosen location nothing will obstruct
the system and its maintenance (ex. difficult access for
3
UNIT DESCRIPTION
Components description: 13.5 p. 66.
MODULATION AND EFFICIENCY IN A RECESS CEILING-MOUNTED UNIT
The range is completed by DUCTIMAX i, which uses inverter EC
technology in the electric motors. To the features of DUCTIMAX
damage occurred during the transport.
For installation and use of accessories, please refer to the relative
technical sheets.
Identify the model of the DUCTIMAX i fan coil following the indi-
cations on the packing container.
SAFETY SYMBOLS
Carefully read this manual.
Warning
Use personal protective equipment
USE APPROPRIATE PPE (GLOVES, PROTECTIVE GOGGLES)
authorized installer and must comply with applicable leg-
islation. Units must be treated at a specialized treatment
facility for reuse, recycling and recovery. By ensuring this
product is disposed of correctly, you will help to prevent
potential negative consequences for the environment and
human health. For more information, contact your installer
or local authority.
ATTENTION:
the unit hasn't dangerous components ac-
cording to the classification of Regulation 1357/2014.
use of spare parts other than original factory parts.
Equipment designed for ambient air conditioning and intended
for use in civil comfort applications, devices not accessible to the
public.
maintenance, etc.),
Ū it is the customer's responsibility to provide safe access to
the base unit, on the sides where there is an electrical box
and water connections, to ensure the proper execution of
routine and extraordinary maintenance operations,
Ū Store the unit in its packing container until you are ready to
install it to prevent dust from infiltrating inside it.
Ū it is necessary to comply with the minimum installation
clearance requirements shown in figure 13.1 p. 63 and
13.2 p. 64.
Ū install only on the wall, in closed ceilings, for physical protec-
tion for unit parts in electrical voltage.
it adds the benefits of brushless technology, including a reduc-
tion in electricity consumption and consequent reduction in CO
2
17
UT66002794
Publicidad
