Descargar Imprimir esta página

Galletti DUCTIMAX i Serie Manual De Instalación, Uso Y Mantenimiento página 22

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

9
TROUBLESHOOTING
If the unit is not working properly, before calling a service engi-
neer carry out the checks indicated in the table below.
PROBLEM
The unit fails to work
The unit provides insufficient cooling
or heating
The unit "leaks" water
22
DUCTIMAX I
CAUSE
No power supply
The automatic safety cutout has tripped
The on/off switch is on
The air filter is dirty or clogged
An obstacle is obstructing the air intake or outlet
Air is trapped inside the heat exchanger
There are open windows and/or doors
The minimum speed has been selected
The unit has not been installed with the correct inclination
The drainage outlet is clogged
If the problem cannot be solved, contact your dealer or the near-
est service centre.
Restore the power supply
Call a service centre for assistance
Start the unit by moving the switch to I
Clean the air filter
Remove the obstacle
Call the installer for assistance
Close windows and/or doors
Select medium or maximum speed
Call the installer for assistance
Call the installer for assistance
SOLUTION

Publicidad

loading