Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
If the engine fails to start, please check the following to
help determine the cause.
1. Make sure there is sufficient fuel in the tank.
BWARNING
Do not let fuel spill on to the ground; it should be
collected in a container. Do not move the fuel close
to a hot engine or exhaust pipe. When doing this
check, fire and fumes should be avoided, do not
move close to any fire source or heat source.
2. Check the battery and fuses work properly.
3. Remove the spark plug, and connect it to ignition coil.
4. Fix the screwed part of spark plug onto the outer case
of engine, open ignition switch to the "*" position,
open engine stop switch to the "*" position, grasp the
clutch lever, the transmission is in neutral, and press
the electric startup button "#". If the ignition system
is normal, there will be blue sparks between the two
poles of the spark plug. If there is no spark, consult
your dealer for repair.
5. If the ignition system is normal, but still can not start
the engine, consult your dealer for repair.
Haojue DR160/DR160S 99011H2J024H000 V04 ES+EN+FR 2020-1-17
50
Haojue DR160/DR160S 99011H2J024H000 V04 ES+EN+FR 2020-1-17
BWARNING
Do not fix the spark plug near the spark plug hole
for inspection, because combustible mixed gas is
likely to be ignited by the spark and result in a fire.
BWARNING
To reduce the possibility of electric shock, it is
advised to fix the metal casing of the spark plug
on an unpainted metal surface of the motorcycle
frame. Persons with heart disease or pacemakers
should not do this inspection.
BCAUTION
You are advised to consult your dealer before
proceeding with repairs. Your dealer will assist you
in solving problems.
(115)
EN
(115)
Publicidad
