Publicidad
Idiomas disponibles
Idiomas disponibles
(112)
Haojue DR160/DR160S 99011H2J024H000 V04 ES+EN+FR 2020-1-17
BWARNING
After a new brake disc or pad is installed, the
braking distance may be a little longer than the
original value.
After the brake discs and brake
pads have realized full break-in following a mileage
of about 300km, the best braking effect will be
realized. Make sure there is an enough braking
distance when riding before that.
BWARNING
Fail to inspect and maintain the brakes pads or
brake disc, and replace them when recommended
can increase your chance of having an accident.
If you need to replace brake disc or brake pads,
have your Haojue dealer do these works. Inspect
and maintain the brake disc and brake pads as
recommended.
EN
REAR BRAKE PEDAL ADJUSTMENT
The rear brake pedal position must be properly adjusted
at all times or the disc brake pads will rub against the
disc causing damage to the pads and to the disc surface.
Adjust the brake pedal position in the following manner:
(112)
Haojue DR160/DR160S 99011H2J024H000 V04 ES+EN+FR 2020-1-17
1. Loosen the lock nut 1, and rotate the push rod 2 to
locate the pedal 32–42mm below the top face of the
footrest.
2. Retighten the lock nut 1 to secure the push rod 2 in
the proper position.
An incorrectly adjusted brake pedal may force
brake pads to continuously rub against the disc,
causing damage to the pads and disc.
Follow the steps in this section to adjust the brake
pedal properly.
TIRES
Periodic checks should be performed for tire pressure
and tire wear status. To ensure maximum safety and
life, check the tire frequently, in addition to the scheduled
inspections.
Tire pressure and wear status are very important
for the performance and safety of the motorcycle.
Be sure to check tire pressure and tire wear status
regularly.
Tire pressure
Under normal temperature, test the tire pressure by using
a tire pressure gauge, set the pressure base on the
32–42mm
47
BCAUTION
BWARNING
Publicidad
