Creating A New Switching Program - Intermatic GRASSLIN talento smart Manual De Instrucciones

CREATING A NEW SWITCHING PROGRAM

Menu Menü
OK
Program
Programm
OK
New
Neu
OK
With Date?
Mit Datum?
No
Nein
Select FNC
FKT wählen
...
...
Programming without date
To create a new switching program, press the key
1. Select and confirm with
Program
2. Select and confirm with
New
The number of available program memory spaces is displayed briefly (PXXX). The number of available
switching channel memory spaces (Dxxx) then appears.
The available memory spaces depend on the variant of the device.
3. In step
With Date?
– and , the device should be programmed without date range.
No OK
The switching command is valid for date independent.
Proceed with action step to step 4.
– Specify and
Yes OK
The switching commands are valid for the dates and/or time periods which are defined in the pro-
gramming, also refer to Seite 53.
You can define multiple date ranges. If the time periods have been determined, end the query after
the last date range with
If you have configured the location information (astro function) in the device, then you can choose
whether the device should be switched directly to sunrise and sunset with one change via the day limit.
The astro function is not available in all device variants, also refer to „Location information (Astro)" auf
Seite 67.
OK
OK
Menu
OK.
.
OK
specify with
so that the device will be programmed with a date range.
.
No
Menu
Menü
OK
Program
Programm
New OK
Neu
With Date? OK
Mit Datum?
Yes
Ja
Date from
Datum von
2015.10.01
2015.10.01
... Day
... Tag
Date from
Datum bis
2015.10.02
2015.10.02
... Day
... Tag
Programming with date
:
OK
OK
Add Date? OK
Weiteres Datum?
No
Nein
OK
Select FNC
FKT wählen
...
...
52
EN