Intermatic GRASSLIN talento smart Manual De Instrucciones página 54

Programming command
A
Menu
Menü
OK
Program
Programm
New OK
Neu
With Date? OK
Mit Datum?
Yes/No
Ja / Nein
1. Press the button:
Menu
2. Select and confirm with
Program
For clarification of the following action steps, see flow chart.
3. Select and confirm with
New
4. In step ? ,specify whether the device is to be activated on a certain date and - if yes -
With Date
confirm with (also refer to Seite 52).
OK
5. Select and confirm with
ON
6. Enter hour and minute of the switch-on time (+/-) and confirm each with
NOTE: The data for sunrise and sunset should be considered in connection with the astro-variant.
The choice of these parameters is between 11 p.m. and midnight.
7. Set the weekday(s) (+/-) to which the switching time should apply, and confirm with
NOTE: The weekdays 1-5, 6-7 and 1-7 are preset. Individual weekdays can be set (+/-) under
"Select days".
(+/-) for which the switching time should be set, and confirm with
8. Select channel
(1)
NOTE: The plus sign stands for an active, the minus sign for an inactive channel.
9. Select to create an additional switching time, or select
YES
priority .
(2)
The channel selection is only available with 2-channel timers
(1)
The choice of priority is only possible in advanced mode; refer to „Defining prioritisation of programs"
(2)
auf Seite 61.
ON
OK
Select FNC
ON
OK
Time
Zeit
09:01
09:01
Hour Stunde
Time Zeit
09:50
09:50
Minutes
Minuten
Days
Tage
12345--
12345--
Mo-Fr
Mo-Fr
OK.
.
OK
.
OK
Channels (1)
Kanäle
(1)
1
1
CH1 CH1
Add Time?
Weitere Schaltzeit?
Ja/Nein Yes/No
OK
Priority
Priorität
High
Hoch
OK
.
OK
to determine the possible
NO
EN
OK
OK
OK
(2)
(2)
.
OK
.
OK
54