Switching State Display - Intermatic GRASSLIN talento smart Manual De Instrucciones

SWITCHING STATE DISPLAY

As an example for channel 1, the switching status display appears as follows:
Channel Fix OFF
There is no display via the icon for the channel in automatic mode.
From the automatic mode, you can make the following settings using the corresponding function key for
channel 1 or channel 2, taking into account the starting point:
• ON
– Press 1x = Override OFF
– Press 2x = Channel Fix OFF
– Press 3x = Channel Fix ON
• OFF
– Press 1x = Override ON
– Press 2x = Channel Fix ON
– Press 3x = Channel Fix OFF
Channel Fix ON Override ON
EN
79