Intermatic GRASSLIN talento smart Manual De Instrucciones página 55

Programming command
B
Menu
Menü
OK
Program
Programm
New OK
Neu
With Date?
OK
Mit Datum?
Yes/No
Ja / Nein
1. Press the button:
Menu
2. Select and confirm with
Program
For clarification of the following action steps, see flow chart.
3. Select and confirm with
New
4. In step ,specify whether the device is to be activated on a certain date and - if yes -
With Date?
confirm with (also refer to Seite 52).
OK
5. Select and confirm with
OFF
6. Enter hour and minute of the switch-off time (+/-) and confirm each with
NOTE: The data for sunrise and sunset should be considered in connection with the astro-variant.
The choice of these parameters is between 11 p.m. and midnight.
7. Set the weekday(s) (+/-) to which the switching time should apply, and confirm with
NOTE: The weekdays 1-5, 6-7 and 1-7 are preset. Individual weekdays can be set (+/-) under
"Select days".
(+/-) for which the switching time should be set, and confirm with
8. Select channel
(1)
NOTE: The plus sign stands for an active, the minus sign for an inactive channel.
9. Select to create an additional switching time, or select
YES
the possible priority
(2)
The channel selection is only available with 2-channel timers
(1)
The choice of priority is only possible in advanced mode; refer to „Defining prioritisation of programs"
(2)
auf Seite 61.
OFF
OK
Select FNC
FKT wählen
OFF
Aus
Time
Zeit
09:01
09:01
Hour
Stunde
Time
Zeit
09:50
09:50
Minutes
Minuten
Days
Tage
12345--
12345--
Mo-Fr
Mo-Fr
OK.
.
OK
.
OK
.
Channels
Kanäle
1
1
CH1
CH1
OK
OK
OK
to determine
NO
OK
(1)
(1)
Add Time? OK
Weitere Schaltzeit?
Yes/No
Ja/Nein
OK
Priority (2)
Priorität
(2)
High
Hoch
.
OK
.
OK
.
OK
EN
55