Making Metronome Settings - Tascam Model 12 Manual Del Usuario

9 - Other functions
Setting the click sound output from the
PHONES jacks and buses (MAIN MIX L/R, AUX
1, AUX 2/FX, SUB L/R)
1.
When the recorder is stopped, select SETTING on the CLICK
Screen, and open the CLICK SETTING Screen. (see "Menu
operation procedures" on page 29)
2.
Select the following items on the CLICK SETTING Screen,
and open the corresponding settings screens.
Option Meaning
Settings for click sent to the PHONES
PHONES1
1 jack
Settings for click sent to the PHONES
PHONES2
2 jack
Settings for click sent to the SUB L/R
SUB BUS
bus
Settings for click sent to the MAIN MIX
MAIN BUS
L/R bus
AUX1 Settings for click sent to the AUX 1 bus
Settings for click sent to the AUX 2/FX
AUX2
bus
Settings screen when PHONES1 selected
3.
Select OUTPUT on the settings screen, and open the
OUTPUT Screen.
4.
Turn the MULTI JOG dial to select the click sound sent to the
CLICK jack.
Option Meaning
OFF (default) No click is sent.
ON Click is sent.
5.
Press the MULTI JOG dial to confirm the setting.
The settings screen reopens.
6.
Select VOLUME on the screen shown, and open the
VOLUME Screen.
7.
Turn the MULTI JOG dial to set the CLICK jack output level.
Options: 0–50 (default: 30)
8.
Press the MULTI JOG dial to confirm the setting.
The settings screen reopens.
50
TASCAM Model 12

Making metronome settings

Specific metronome settings can be made.
1.
When the recorder is stopped, select CLICK on the MENU
Screen, and open the CLICK Screen. (see "Menu operation
procedures" on page 29)
2.
Select METRONOME on the CLICK Screen, and open the
METRONOME Screen.
3.
Turn the MULTI JOG dial to select a metronome setting
item. Then, press the MULTI JOG dial.
The corresponding setting item screen will open.
BAR DISP
This sets the display of the time counter on the Home
Screen.
Options: OFF (default), ON
When ON, the time counter on the Home Screen switches
to bars and beats, showing the tempo and time signature
in the B area.
The maximum number of bars that can be shown is 10000.
TEMPO
This sets the tempo.
The setting range is from 20 to 250 (BPM). (Default: 120)
Turn the MULTI JOG dial to set the tempo.
The CLICK button can also be tapped repeatedly at the
desired tempo to set it.
When the footswitch function is "TAP", the footswitch can
also be used for input. (see "Setting up the footswitch" on
page 55)
NOTE
Press the F4
button to turn the click sound on/off
during tempo setting.