Publicidad
Idiomas disponibles
Idiomas disponibles
Up to 28cm
+6cm
12cm
PRODUCT DESCRIPTION
The new MARINELAMP LED lamp has been designed and optimized to guarantee quality
lighting in the marine aquarium, ensuring the proper growth and developement of all type
of corals and light-dependent photosynthetic organisms, with the following features:
- LED lighting with 91 EPISTAR LED 1W distributed throughout the lamp area for maximum
light distribution.
- Two light channels controlled independently by aquaControl Wi-Fi controller: White
channel with 11 LEDs (8000K) and blue channel with 80 LEDs (28 actinic blue 450nm,
42 royal blue 460nm, 6 violet 430nm and 4 ultraviolet 380nm).
- Anodized aluminum body with elegant black finish.
- Hanging holder adjustable at different distances vertically and horizontally, with anti-
corrosion plastic bracket.
INSTALATION
A. Attach the body lamp (1) to the upper area of the holder (2) usign the screws provided
for this.
B. Place the plastic bracket (3) in the lower area of the holder (2), using the crews
provided for this, and attach it to the Aquarium glass, leaving the holder on the outside.
C. Set the connections between the display cable, the aquaControl controller and the
power adapter.
D. Plug in the system and start the settings and configurations for your lamp as shown in
the picture below.
2
3
22cm
9cm
1,6cm
1
ENGLISH
20cm
3,3cm
8cm
Publicidad
