Keep third parties away from the power tool's area
of operation. Never work while animals or people,
especially children, are in the danger zone.
Clothing worn during the appliance operation must be
adequate, tight and closed. Do not wear loose clothing or
jewelry. Keep hair, clothing and gloves away from the
suction port or moving parts.
Keep the work area clean, organized and well lit (250 to 300
lux), thus decreasing the risk of accidents.
The control and safety devices installed must not be
removed or inhibited.
Do not cover the power tool during use. To avoid risk of
overheating, keep ventilation slots clean and unclogged to
allow proper airflow.
Before performing cleaning, adjusting, repairing and
maintenance tasks, always unplug the power cord.
Replace worn out or damaged parts immediately, so that
the power tool is always in a safe operating condition.
Cleaning:
The appliance must be completely cleaned after each use.
Do not use aggressive cleaning products. These products
may damage plastics and metals, compromising the safe
operation of the power tool.
Maintenance:
Only maintenance works described in this instruction
manual may be carried out. All other tasks must be
performed by an official dealer.
If any components or safety devices are removed for
maintenance
works,
immediately and correctly.
Maintenance of double-insulated equipment requires
extreme care and knowledge of the whole system and
should only be carried out by a qualified technician.
Replacement of components should only be done with the
same parts as the originals.
they
must
be
repositioned
Use only VITO-approved accessories for this appliance or
technically identical parts. Failure to do so may result in
personal injuries or damages to the ash vacuum cleaner. If
in doubt, if you lack knowledge or resources, you should
contact an official dealer.
The ash vacuum cleaner should only be serviced by the
brand's technical assistance center, or other qualified
personnel, replacing any necessary parts with original
ones.