Publicidad
Idiomas disponibles
Idiomas disponibles
Question/Problem - Cause
Cause
The vacuum cleaner does not start:
• No supply voltage;
• Faulty ON/OFF switch;
• Faulty electric motor;
The
motor
makes
intermittently or runs slowly:
• ON/OFF switch electrical contacts are damaged;
• Mechanical parts are blocked;
Low suction power:
• HEPA filter is completely dirty;
The warranty for this product is in accordance with the law
in force from the date of purchase. You should, therefore,
keep your proof of purchase during this period. The
warranty covers any manufacturing defect in material or
operation, as well as parts and work needed for their
repairing.
Excluded from the warranty are the misuse of the product,
any repairs carried out by unauthorized individuals (outside
the service center of the brand VITO) as well as any damage
caused by its use.
an
abnormal
sound,
Solution
• Check the power cord, plug and socket;
• Call brand's technical assistance;
• Call brand's technical assistance;
starts
• Repair or replace the switch;
• Inspect the mechanical parts;
• Clean the filter according to the maintenance
instructions;
We declare, under our sole responsibility, that the product
labelled 4L 800W ASH VACUUM CLEANER
complies with the following standards or normative
documents:
1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019+
A15:2021, EN 60335-2-2:2010+A11:2012+A1:2013, AfPS GS
2019:01 PAK, EK1 498-11:2011, EN 55014-1:2017+A11:2020,
EN 55014-2:2015, EN IEC 61000-3-2:2019, EN 61000-3-
3:2013+A1:2019,
2006/42/EC – Machinery Directive
2014/35/EU – Low Voltage Directive
2014/30/EU - Electromagnetic Compatibility Directive
S. João de Ver,
06
th
july 2022
Central Lobão S. A.
Technical supervisor
Hugo Santos
EN
62233:2008,
as defined
by:
with code VIAC4
EN
60335-
Publicidad
