Publicidad
Idiomas disponibles
Idiomas disponibles
4. INSTALLATION
4.3 Fixing:
Tools
1.
Screwdriver 3.5 mm.
Passo a passo sugerido
Suggested step by step (DIN rail 35 mm)
1.
Partially attach the base of the SPD, opposite the DIN rail lock;
2.
Engage the lock with a 3.5 mm screwdriver;
3.
Push the SPD all the way in and release the lock.
Passo a passo sugerido
Suggested Step-by-Step (Claws - NEMA)
1.
Insert the NEMA clamps (kit not included) into the sides of the SPD;
2.
Place the screws into the hole in the clamps;
3.
Tighten the screws with a 3.5 mm screwdriver until they are fixed in the
electrical panel.
CLAMPER Indústria e Comércio S.A.
www.clamper.com.br
|
16103133
+55 31 3689 9500
Page 33 of 44
Publicidad
