Publicidad
Idiomas disponibles
Idiomas disponibles
4. INSTALLATION
4.5 Connection of remote signaling lines:
Tools
Paint stripper;
1.
Cutting pliers;
2.
Screwdriver for 2.5 mm screw.
3.
Passo a passo sugerido
Suggested step-by-step
1.
Strip the conductor to a length of 5 to 7 mm;
2.
Turn the key counterclockwise until the terminal block cage is completely
open terminal block;
3.
Insert the stripped part of the conductor into the open wireway of the
terminal block;
4.
Turn the wrench clockwise until the wire is tight in the terminal block;
5.
With the torque wrench set at 0.4 ± 5% N.m.
Caution
Before handling electrical cables, make sure they are de-energized.
Caution
CLAMPER Indústria e Comércio S.A.
1
2
www.clamper.com.br
5 a 7 mm
máx. 1,5 mm²
|
+55 31 3689 9500
16103133
Page 35 of 44
Publicidad
