Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Procedure
1. Install the nuts into the holes in the toilet bowl.
3. Screw the bolts into the nuts. Do not fully tighten.
5. Adjust the bidet seat evenly over the toilet bowl.
2. Place the Mounting plate with bolts and sliding
plates onto the toilet bowl. Align the bolts and
sliding plate with the seat post hole.
4. After mounting the mounting plate, slide the bidet
seat fully into position until it clicks into place.
6. Press the quick release button to release
the seat.
4
760416-100EN Rev. 1 6/22
Publicidad
