Beta 1438K/PWR Instrucciones página 11

- Fit the plate (1) onto the clutch by fixing it to the clutch housing with the four bolts (4), and applying
the set screw (3) (see fig. 11).
- Rotate the screw head clockwise, until the snap ring fits into the seat (see fig. 12).
DOUBLE CLUTCH ACTUATOR REPAIR
When removing the double clutch, reposition the clutch actuators correctly. Reposition the clutch
actuators as follows:
- Remove the actuators (fig. 13).
- Use bush 12 and rotate clockwise (14 turns) (fig. 14), so that the actuators can be restored to their
correct position.
- Reinstall the actuators.
Fig. 11
Fig. 12
Fig. 13
Fig. 14