KUNERT ROY Manual De Instrucciones página 9

The pram also comes with a car seat option for children. To mount the car seat, the car seat adapters need
to be mounted first to the chassis. To mount the adapters on the chassis, click them into designated slots
(one on each side of the pram) (fig. 23). WARNING! Before using the car seat, ensure that the car seat
adapters are correctly mounted. Both adapters should be locked. After correct mounting of the car seat
adapters on the chassis, you can move on to mounting the car seat. To mount the car seat, you need to fit
its buckles into matching plastic handles on the adapters (fig. 24). This pram does not substitute a cradle or
a crib. If your child needs to sleep, it is recommended to put him/her in an appropriate carrycot, cradle or
crib. The car seat comes with a hood and a cover which are mounted with snaps. The car seat is equipped
with an adjustable handle. The handle is adjusted by pressing the red buttons on both sides of the car seat
and moving the handle into a desired position (fig. 25). To remove the car seat, you need to pull the levers
on both sides of the car seat (fig. 26). To dismantle the adapters, press the buttons on the both sides of the
pram chassis.
To mount the carrycot on the stroller's frame, you must first plug the walking version of the seat
into the stroller's frame (see seat assembly below). WARNING The seat with the attached carrycot
insert must be facing backwards to the direction of travel of the stroller. After installing the seat,
insert the insert into the stroller (Fig. 31) and then attach the carrycot (insert) to the intended
attachments in the stroller (one on each side of the stroller) (Fig. 32) until the hooks are locked.
After installing the gondola (insert), check the correctness of fastening. WARNING Whenever
there is a carrycot (insert) in the stroller, the footrest should be set in a horizontal position so that
the indicating lines are even (fig. 33), and the backrest in the flattest position. To disassemble the
carrycot, press the insert lock buttons located on both sides of the carrycot (fig. 32) and lift the
carrycot by the handles. WARNING Do not fold the stroller with the carrycot attached. Warning
This product is suitable for a child who cannot sit unaided, roll over and move around on his lap.
Maximum child weight: 9 kg.
To adjust the handle height, you need to press the buttons on both sides of the handle and then adjust the
height while simultaneously pressing the buttons (fig. 27).
To mount the carrycot on the chassis, click it into designated slots (one on each side of the pram) (figs 10,
11) until the hooks are locked. The hooks are locked automatically. Warning The carrycot should always be
mounted rear-facing (so that the child faces the person pushing the pram). To take the carrycot off, press
the adapter buttons on both sides of the pram (fig. 11) and lift the carrycot up using the handle.
The carrycot has a permanently attached hood. You can adjust the hood as necessary by pressing buttons
on both sides of the hood and positioning the hood as necessary (fig. 12).
The gondola (insert) comes with a cover that can be opened or closed with a zipper.
To mount the seat on the chassis, click it into designated slots (one on each side of the pram) (fig. 15) until
the hooks are locked (fig. 11). The hooks are locked automatically. The stroller seat may be mounted in
front-facing and rear-facing positions. To remove the seat, press the buttons on the both sides of the pram
chassis (fig. 11).
The pram seat is equipped with a protective hood. To mount it, slide its hooks into designated slots on both
sides of the pram seat chassis until the hood is locked (fig. 16). To remove the hood, press the buttons of
the hooks on both sides and pull up the hood (fig. 16). The position of the hood is adjustable. It can be
positioned differently. To adjust the hood position, move it forwards or backwards to achieve the desired
CARRYCOT ASSEMBLY AND DISASSEMBLY
HANDLE HEIGHT ADJUSTMENT
MOUNTING AND REMOVAL OF THE CARRYCOT
CARRYCOT HOOD
CARRYCOT COVER
MOUNTING AND REMOVAL OF THE PRAM SEAT
PRAM SEAT HOOD
9