Assembly - GREENTIME 52 PRO Manual Del Usuario

ASSEMBLY

Mounting the Bike Handle
–Do not rotate the control handle (1) between unpacking and mounting it on
the handlebar
–The machine is shipped with the clamp moldings (4) mounted on the
handlebar (2).
Do not change the position of the clamp moldings on the handlebar until the
control handle is mounted
–To assemble the swivelling handle support it is necessary to fit a spring in
the clamps and secure them to the handle support on the machine.
Use the spring (5) from the parts kit supplied with the machine.
Push the spring (5) into the lower clamp molding (6).
–Position the clamp moldings (4) with handlebar (2) on the handle support (7).
Do not rotate the handlebar in the clamp moldings.
–Raise the grip of the wing screw (8) to the upright position.
7