Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION METHOD
Please check the necessary tools and accessories carefully before installation. Do so
with the power disconnected and the water stopcock turned off.
STEP 1
Before installation, check the position of the water valve on the tap.
NOTICE
1. Nowadays, most domestic sinks use both hot and cold water pipes for the water
supply. Select the cold water pipe for the osmosis unit during installation (tap wa-
ter) of water supply (Figure 1).
2. The osmosis unit is normally positioned in this way (Figure 2)
3. The tap has three positions: "Closed" – "Pure water" (only passes through the PCBA
filter) and "Osmosis water" (passes through the filter and the membrane as well)
Figure 1
STEP 2 - TAP INSTALLATION
1. Generally, choose the left or right corner of the sink, and install according to the
users' habits (washing vegetables, washing rice).
Choose the sink angle desired by the user.
26
Figure 2
EN
Publicidad
