Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
RESET
Reset button: Long press for 6 seconds.
SELECT
Select button: Select the filter element
and then select the "reset" button to set
the filter element.
*Fault
If it runs for 30 consecutive minutes, the
"fault" light comes on.
*Inlet TDS
Input TDS reading.
REPLACEMENT SCHEDULE OF MAIN PARTS
The user can determine the specific replacement schedule according to the local
water quality.
We recommend the replacement cycle of the filter element in the osmosis unit.
CBPA
Replacement schedule of the first
level PP+AC composite filter element:
8-12 months.
In general, consider replacing the filter element in the following situations:
1. When the taste of the effluent water decreases and the TDS of the pure water
increases.
2. The effluent flow is significantly reduced.
3. The surface of the filter element is covered by contaminants.
4. The colour of the filter element is very discoloured.
When the machine prompts you to change the filters, please pay attention to this
notice and have them replaced by contacting the technical service.
*Outlet TDS
Output TDS reading.
*RINSE
Rinse button: The osmosis unit rinses the
ROCB filter element (To rinse the CBPA
filter element, open the kitchen tap and
rinse with running tap water).
*UV
Ultraviolet is in operation.
ROCB
The second level RO membrane is
equipped with activated carbon.
Replacement schedule of the composite
filter: 12-24 months.
29
EN
Publicidad
