BS Charger BK15 Manual De Usuario página 3

 Multi Charge Stages:
o Battery condition check
o Enhanced battery rejuvenation
o Soft Start
o Bulk Charging
o Absorption Charging
o Voltage analysis
o Float Mode
o Long term maintenance pulse charge
 Diagnosis & Charge - Automatic diagnosis and charge: On power up, the charger will
automatically diagnoses the battery condition, and then determine if the battery charger
engages the rejuvenation stage or goes into charging cycle.
 Enhanced battery rejuvenation stage – Patented battery rejuvenation technology: The
program will engage a unique rejuvenation method with high voltage equalizing and peak
pulse reconditioning stage alternatively applied in turn, which is subjected to the initial
battery internal impendence detection and battery load detection in vehicle electric system, it
could be efficiently desulphated to the some batteries with deep-charge or no charge for many
months, and without any risk if it is connected to the vehicle electric system.
 Charge & Maintain - Automatic Maintenance: The battery charger could be left unattended
and it is full time managed by program; when the battery is charged to "full" state, the
charger automatically switches to maintain the battery. It will monitor the battery voltage and
continue to peak performance with special pulse charge in long term maintenance.
 Short circuit or Reverse polarity protection: The charger will automatically turn off when
the output short circuit or reverse polarity occurred and prevent any damage.
 Never overcharge your battery
 Heavy-Duty cables
 Quick connector and Output clips: BK15 provide five groups of output cable with quick
connector and clips, it makes you can charge or maintain five batteries at one time
 Wall mounting installation: BK15 is also able to be installed onto the wall or other surface,
the dimension for the installation as below:
3