BS Charger BK15 Manual De Usuario página 4

Idiomas disponibles

TEMPERATURE & SAFETY PROTECTION:

The BK15 contains 4 safety protections:

 INTERNAL OVERHEAT PROTECTION: The BK15 is built-in with overheat and overload

electronic circuit. When the charger is overheated, the charger will decrease the charging

current. If temperature is decreased, the charger will resume to normal charging.

 TIMER PROTECTION: The charger provides the maximum charging timer management for

each charging stage; this condition may occur if attempting to charge any severely discharged

or heavily sulfated battery. Once the charger is timed-out, the charger will stop charging for

protecting your battery and the RED LED will be slow FLASH, while this situation occurs,

please check with your battery statues.

 REVERSE POLARITY: The charger has reverse battery protection. If a reverse battery exists

(Red LED ON, while output leads are connected backwards), simply unplug charger from

AC power and properly remake the connections as described in this manual.

 SHORT CIRCUIT PROTECTION: The charger has output short-circuit protection. If the

charger output lead short condition exists (Red LED ON), while output leads are connected

backwards), simply unplug charger from AC power and properly remake the connections as

described in this manual. The charger employs the firm hardware and smart program to

automatically detect the output connections. Once the charger detects the output short-circuit

or reverse polarity, it will not deliver any output current.

BATTERY TYPES & CAPACITY:

 Suits all Lead Acid Type Batteries. (GEL, SLA, AGM, Calcium)

 12 Volt Output, Charging current 1500mA

 Battery Capacity: The following maximum AH capacities are to be used as a general guide

only: some batteries maybe able to handle a higher Charge Current. Check with the battery

Manufacturer when charging batteries with small capacity.

Charge Current (for each channel)

Battery Capacity: Charging

Battery Capacity: Maintaining

ELECTRICAL PARTS:

Delivered with:

 Input Cord: 183 cm VDE cord with 3 PIN plug

 Output Cords ( 5 groups): 120 cm with quick Connector and Battery Clamp

ENVIRONMENTAL CHARACTERISTICS:

 Operating Temperature: 0 to 40° C

 Storage Temperature: -25 to 85°C

 Operating Humidity Range: 0 to 90% RH

 Cooling: By fan forced air

1500mA

4-30AH

4-120 AH