Publicidad
Idiomas disponibles
Idiomas disponibles
2. CONNECT ELECTRICAL:
For connection to the power supply refer
to the following Fig.12:
1. Remove the power supply cover by
undoing the (2) screws Fig.12A.
2. Break through the hole on the box
cover.
3. Secure the power supply conduit to the
cover.
4. Connect the wires of the hood to those
of the power supply as described Fig.12B:
BLACK = L line
WHITE = N neutral
GREEN/YELLOW = G ground
- A double-pole switch properly rated
must be installed to provide the range
hood power supply disconnection.
- Connect the electrical conduit to the
Field Wiring Compartment using listed
conduit fittings.
- Carry out the power supplly connection
in accordance with the national electric
B
Fig.12
A
Fig.12
Fig.13
- 14 -
Publicidad
