Publicidad
Idiomas disponibles
Idiomas disponibles
Step 5
Slide wheel axle through the holes in the
wheel legs as shown.
Step 6
Attach wheels to the wheel axle using two
M12 wheel axle nuts.
Step 7
Attach handle to the cooking chamber
using four M6 X 12 mm bolts and four M6
nuts as shown.
Step 8
Attach smoke stack to the cooking
chamber using smoke stack gasket and
four M6 X 12 mm bolts with four M6
nuts as shown. Insure that the gasket is
in between the smoke stack and cooking
chamber.
Note: With the help of a friend, turn the
assembled grill upright. Try to
minimize the stress to the legs.
Step 9
Remove cap nut and spring from smoke
stack. Place smoke stack damper over the
bolt at the top of the smoke stack. Then
place the smoke stack damper spring over
the bolt and tighten with cap nut.
7
Publicidad
