Home Decorators Collection GREENHAVEN 56006 Guía De Uso Y Mantenimiento página 7

Assembly - Standard Ceiling Mount
1
Preparing for mounting
NOTE: The magnet is pre-attached on the canopy
bottom cover for you to remove and install easily.
□
Remove the magnetic canopy bottom cover (JJ) from the
canopy (C) by pulling it off.
□
Loosen the two canopy screws (FF) located in the bottom of
the slide-on mounting bracket (A).
□
Turn the slide-on mounting bracket (A) counterclockwise and
lift it up to remove the slide-on mounting bracket (A) from the
canopy (C).
2
Routing the wires
NOTE: The fan comes with 12 in. lead wires for use with the
provided 6 in. ball/downrod assembly (B). If you wish to use
a longer downrod, attach the 3-pin extension wire (N) and
2-pin extension wire (O) to the fan by connecting the molded
adaptor plugs from the extension wires to the 3-pin and
2-pin adaptor plugs from the fan.
□
Route the wires exiting the top of the fan motor assembly (E)
through the decorative motor collar cover (D) and then the center
of the canopy bottom cover (JJ).
□
Make sure the opening of canopy (C) is on top and insert the ball/
downrod assembly (B) through the canopy (C).
□
Route the wires exiting the top of the fan motor assembly (E)
through the downrod as shown.
7
Please contact 1-877-592-5233 for further assistance.
A
FF
C
JJ
C
JJ
D
B
E
HOMEDEPOT.COM/HUBSPACE