Rohde ST 410 Instrucciones De Uso página 58

Display Icon
600
598
150
d f
*The keys or can also be held down for faster input.
Changing a cooling ramp to a heating ramp:
Display Icon
Pr. 1
3
150
599
601
150
d f
*The keys or can also be held down for faster input.
Meaning Description
Soak/Target
temperature
This can be altered with the
d
&
Soak/Target f
The
temperature
and the
display return to the ramp
rate.
Cooling ramp
A cooling ramp is now set in
the selected segment.
Meaning Description
Select the firing program that
Program number
is to be changed.
Select the segment with the
Indicator in the
cooling ramp to be changed
segment display
into a heating ramp.
Cooling ramp
Press the
the soak or target
temperature.
Soak/Target
temperature
This can be altered with the
d
&
Soak/Target d
The
temperature
value, and the
the display return to the ramp
rate.
Heating ramp
A heating ramp is now set in
the selected segment.
56 / 291 - EN -
f
keys.
key reduces the value,
h
key makes the
g
key to switch to
f
keys.
key increases the
h
key makes
Remark
The temperature in the selected
segment is higher than in the
previous segment.
 Soak/target temperature in
the previous segment (2) =
599°C
From here on, the segment can
be fully programmed as a cooling
ramp.
Remark
See Section 6.4.1.
See Section 6.4.1.
A cooling ramp is now set in the
selected segment.
The temperature in the selected
segment is lower than in the
previous segment.
 Soak/target temperature in
the previous segment (2) =
600°C
From here on, the segment can
be fully programmed as a heating
ramp.