Cherubini Domi A510044 Manual De Instrucciones página 26

impulses (other utilities).
- At the end of the procedure try the commands on the utility, as suggested by DOMI.
- If the utility does not respond to the commands, confirm the disassociation on DOMI.
After confirmation, the disassociated utility will also be removed from DOMI.
If the utility is used inside of a group, DOMI will not permit the deletion of the utility. To
delete, that utility will first have to be removed from the group.
Display filters
A display filter may be applied to the "utility" screen so that only the utilities
corresponding to the type requested are shown:
Example: Display all utilities
programmed:
GROUP CONFIGURATION
Creation and change of a utility group
- Open the "Group" menu from the quick access bar.
- Access the "Change Group" section using the icon
- Create a new group by clicking on
- Name the group.
- Select the utility, among those available, to include in the group.
- Save the group
- Close the "Change Group"menu.
Select the group just created to view and activate the available commands.
Delete a utility from a group
- Open the "Group" menu from the quick access bar.
- Access the "Change Group" section using the icon
- Select the group to be changed.
.
Example: Display only "filtered" utilities
based on the selection requested, in
this case, blinds:
.
.
.
26