WIKA DG-10 Manual De Instrucciones página 15

6. Commissioning, operation
Sealing of the process connection
Parallel threads

per EN 837
Correct sealing of the process connections with
parallel threads at the sealing face
made using suitable flat gaskets, sealing rings or
WIKA profile sealings.
For further information on sealings see WIKA data sheet AC 09.08 or under www.wika.com.
Rotatability of the case
The case of the model DG-10-E can be rotated through 300°, thus the
display can be read from almost any position.
Do not turn the case forcibly past the stop point.
WIKA operating instructions digital pressure gauge, model DG-10

per DIN 3852-E
must be

Tapered threads
NPT, R and PT
For sealing process connections with tapered
threads, the sealing must be made in the threads
using additional sealing material, e.g. PTFE tape
(EN 837-2).
GB
300°
15