Safety; Intended Use - WIKA DG-10 Manual De Instrucciones

2. Safety

2. Safety
WARNING!
GB
Before installation, commissioning and operation, ensure that the appropriate digital
pressure gauge has been selected in terms of measuring range, design and specific
measuring conditions.
Non-observance can result in serious injury and/or damage to the equipment.
WARNING!
■
■
■
Further important safety instructions can be found in the individual chapters of these
operating instructions.

2.1 Intended use

The digital pressure gauge acts as the display for the applied pressure. The pressure value is displayed
via a digital indicator.
The instrument has been designed and built solely for the intended use described here, and may only
be used accordingly.
The technical specifications contained in these operating instructions must be observed. Improper
handling or operation of the digital pressure gauge outside of its technical specifications requires the
digital pressure gauge to be taken out of service immediately and inspected by an authorised WIKA
service engineer.
The manufacturer shall not be liable for claims of any type based on operation contrary to the intended
use.
6
Open the connections only after the system has been depressurised.
Observe the working conditions in accordance with chapter 3 "Specifications".
Always operate the digital pressure gauge within the overpressure limit.
WIKA operating instructions digital pressure gauge, model DG-10