Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Important information concerning
installation!
•
To
ensure
recommendations given in the present manual.
•
Unpack the appliance and visually check that it is not damaged. Do
not connect a damaged appliance. Inform your retailer or point of sale of
any damage. In such a case, keep the packaging.
•
It is recommended that the appliance be allowed to settle for at least
4 hours before connecting the electrical power supply, so that
the compressor fluid feed is correct.
•
Proper air circulation is necessary to avoid overheating. To ensure
sufficient ventilation, observe the installation recommendations provided.
•
In order to avoid fire risk, wherever possible, ensure that the
appliance is not in contact with walls or with any hot element
(compressor, condenser). Observe the installation recommendations.
•
The appliance should not be placed close to radiators or cooking
hot plates or gas
•
Check that electrical sockets remain accessible when the appliance
is installed.
POWER SAVING
To limit the electricity consumption of your appliance:
• Install it in an appropriate place (see "Installing your appliance").
• Leave the doors open as little time as possible.
• Do not put food that is still hot into the appliance.
•To ensure that the appliance operates properly, clean the
condenser regularly (see "Routine servicing of your appliance").
• Regularly inspect the door seals and ensure that they are still closing
properly. If this is not the case, contact your after-sales service.
proper
electrical
rings.
connection,
6
follow
the
Publicidad
