Publicidad
Idiomas disponibles
Idiomas disponibles
Prior to installation, ensure that the local distribution conditions (nature of the gas and gas
pressure) and the adjustment of the appliance are compatible.
This product is not connected to a combustion products evacuation device. It should be
installed and connected in accordance with current installation regulations. Particular
attention should be given to the relevant requirements regarding ventilation.
Before installing, turn OFF the gas and electricity supply to the appliance.
Gas pipe or connector shouldn't be bent or blocked by any other appliances.
Check the dimensions of the appliance as well as the dimensions of the gap to be cut in the
kitchen unit.
The panels located above the work surface, directly next to the appliance, must be made of
non-flammable material. Both the stratified surfacing and the glue used to secure it should
be heat resistant, to prevent deterioration.
Turn on appliance tap and light each burner. Check for a clear blue flame without yellow
tipping. If burners show any abnormalities check the following:
Burner lid on correctly
-
Flame spreader positioned correctly
-
Burner vertically aligned with injector nipple
-
A full operational test and test for possible leakages must be carried out by the fitter after
installation.
The flexible hoses shall be fitted in such a way that it cannot come into contact with a
moveable part of the housing unit and does not pass through any space susceptible of
becoming congested.
SAFETY ACTIONS FOR GAS LEAK
Do not turn on the light.
Do not switch on/off any electrical appliance and do not touch any electric plug.
Do not use a telephone.
Stop using the product and close the middle valve.
Open the window to ventilate.
Contact with service centre by using a phone outside.
INSTALLATION:
Remove all packaging before using the appliance.
After unpacking the appliance, make sure that product is not damaged and that the
connection cord is in perfect condition. Otherwise, contact the dealer before installing the
appliance.
The adjacent furniture and all materials used in the installation must be able to withstand a
minimum temperature of 85ºC above the ambient temperature of the room it is located in,
whilst in use.
The gas pipe and electrical cable must be installed in such way that they do not touch any
parts or the appliance.
The adjustment conditions for this appliance are stated on the label.
The use of a gas cooking appliance results in a production of heat and moisture in the room
in which it is installed. Ensure that the kitchen is well ventilated: keep natural ventilation
holes open or install a mechanical ventilation device (extractor hood).
Prolonged intensive use of the appliance may call for additional ventilation, for example
opening of a window, or more effective ventilation, for example increasing the level of
mechanical ventilation where present.
Publicidad
