Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE AND CLEANING INSTRUCTIONS
Before carrying out any maintenance or cleaning work,
unplug the power cord from the socket, empty air
receiver tank and allow the compressor to cool down, in
order to avoid any accidental starts and burns.
Draining the condensed water off the air tank
To ensure a long service life of the air receiver tank, it is
advisable to drain the condensed water after each use
of the compressor, especially when it is used in moist
climates.
1. Unscrew the tank drain plug (9);
2. Wait until all the accumulated condensed water has
flowed out;
3. Screw the tank drain plug;
The condensed liquid inside the compressed air
tank contains oil waste. Dispose of condensed
liquid in an environmentally friendly way at a proper
collection point.
Air filter cleaning
The air filter (17) is a protective component in the air
intake. It prevents the suction of dust, dirt and elements
that impair the proper operation of the compressor. It
must be cleaned regularly. A clogged air filter reduces
considerably the production of compressed air.
1. Unscrew and remove the filter cap;
2. Remove the filtering element and clean it
completely;
3. Place the filter element and fit the remaining
components in reverse order to disassemble;
The use of the air filter does not ensure the quality
of the air provided by the compressor. This air is
unsuitable for humans to breathe.
Cleaning and storage
Cleaning
After each use clean all compressor components. Wipe
the power tool with a clean, damp cloth or blow it with
low pressure compressed air. Careful handling protects
the power tool and extends its service life.
Keep the compressor and its ventilation slots clean.
Clean ventilation slots regularly or whenever they
become clogged.
Storage
To prevent unintentional start-up, unplug the power
cord, empty the air receiver tank and remove all
compressed air tools connected to the compressor.
When not in use, store the air compressor in a dry, clean
place, free of corrosive smoke and out of children's
reach.
ENVIRONMENTAL POLICY
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your
household waste!
According to the European Directive 2012/19 /EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
Waste such as old oil, lubricant, filters and worn-out
parts can harm humans, animals and the environment
and as such must be properly disposed of or recycled.
You can get information about the disposal of the used
compressor from the legal responsible for recycling in
your town.
CUSTOMER SERVICE
Tel.:
+351 256 248 826
E-mail:
international@centrallobao.pt
Website:
www.centrallobao.pt
39
Publicidad
