VITO PRO-POWER VICSOS50 Manual De Instrucciones página 42

The compressor starts up regularly due to the
pressure drop in the tank, without any air tools
coupled or flowing from the distribution network:
• Air leak through the couplings;
42
• Let the compressor warm up until the maximum
pressure is reached and then switch off the
compressor.
If air leaks are inaudible, throw water with
detergent over all connections.
Air leaks will be exposed by the formation of air
bubbles.
Tighten the couplings where there are bubbles. If it
persists, contact technical assistance;