Waeco MagicSpeed Accessory MS-BE5 Instrucciones De Montaje Y De Uso página 34

MagicSpeed Accessory
➤ Switch the ignition off.
✓ The LED on the control panel goes out.
➤ Wait ten seconds.
➤ Disconnect the slotted pieces (fig. 9, page 6).
➤ Go for a test drive (see chapter "Performing a functional test" on page 33).
9 Performing a functional test
Note
I
The lowest speed at which the speed regulator can operate is
approximately 30 km/h and the highest approximately 140 km/h
➤ Start the vehicle.
➤ Switch on the speed regulator using the ON/OFF button on the control
panel.
➤ Drive at a speed of 40 to 50 km/h.
➤ Press the SET button to activate the speed regulator.
✓ The speed controller gently takes on the speed and maintains the driving
speed constantly.
10 Using MagicSpeed
MagicSpeed is controlled using the button on the control panel.
Enabling and disabling MagicSpeed
➤ Press the ON/OFF button once to switch on the speed regulator.
✓ The LED on the control panel lights up.
➤ When the speed regulator is switched on, press the ON/OFF button once
to switch it off.
✓ The LED on the control panel goes out.
✓ The last saved speed will be discarded.
Performing a functional test
33