Waeco MagicSpeed Accessory MS-BE5 Instrucciones De Montaje Y De Uso página 35

Using MagicSpeed
Saving your desired speed
Use the SET/ACC button to save the speed you want on the speed regulator.
Caution
a
The engine can be damaged if the speed is too high. Save the
desired speed whilst underway when you are travelling at that
speed.
➤ Press the SET button and let go again immediately to set the speed you
are currently driving.
This set speed is maintained until:
– You press the brake or clutch pedal
– You switch off the device with the ON/OFF button
– The car slows down to below the lower activation speed
– The speed drops on a slope by more than 25%.
➤ Press and hold down the SET button to accelerate the car.
When you let go of the SET button the speed regulator records the
current speed and saves it.
Using the last saved speed
Press the RES/DES button to recall the last saved speed when:
You have switched on the speed regulator using the ON/OFF button
You do not press the brake or clutch pedal
You do not switch off the ignition in the meantime
Your vehicle is travelling at over 35 km/h
➤ Press the RES button and let go again immediately to recall the last saved
speed.
34
MagicSpeed Accessory