Frost Protection; Care And Maintenance - URSUS TROTTER UT-HIDROXPERTEN Manual De Usuario

Hidrolavadora 3 en 1
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

prevent the water in the unit from expanding under
freezing conditions.
• We recommend using the original package for
storage or covering the product with a suitable
cloth or enclosure to protect it against dust.

FROST PROTECTION

ATTENTION
Appliance and accessories that are not completely
drained can be destroyed by frost.
Completely drain appliance and accessories and
protect them against frost. To avoid damage:
• Detach the appliance from the water supply.
• Detach spray lance from the trigger gun.
• Turn on the appliance power switch
• Push the lever of the trigger gun until no more
water is escaping .
• Release the lever of the trigger gun.
• Lock the lever of the trigger gun.
• Turn off the appliance power switch.
• Store the appliance and the entire accessories in a
frost free room.

CARE AND MAINTENANCE

Risk of electric shock
Prior to all work on the appliance, switch off the
appliance and pull the power plug.
HIGH PRESSURE HOSE
The high pressure hose is specially constructed with
reinforced walls it can be easily damaged and should
be stored carefully.
• Do not kink.
• Do not drive vehicles over the hose.
• Do not expose the hose to sharp edges or corners.
Misuse will lead to ballooning or premature failure
and will invalidate warranty.
CLEAN THE SIEVE IN THE WATER CONNECTION
Clean the sieve in the water connection regularly.
Remove coupling from the water connection, and
rinse with warm water to prevent any foreign
matter from clogging the pump.
Clean the nozzle with the needle clean-out tool
provided . Remove the spray wand from the gun.
Remove any dirt from the nozzle hole and rinse.
ATTENTION
• The sieve must not be damaged.
• Pull the sieve out using flat pliers.
• Clean the sieve under running water.
• Reinsert the sieve into the water connection.
CLEAN THE DUST BAG
Pressure the locking block, then push front to open
the dust compartment.
Take up the dust compartment.
Pressure the automatic release button to empty.

Hide quick links:

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido